AFRSN Question - SV7000

[phoneguy94]

I can't remember how to fix this.
I'm programming AFRSN in my SV7000.

I have to break out 919 to isolate 91916. When I try to enter those digits I get the following error "Digit Code Input Number of Digit unmatched. (Error 0x0403)."

I changed AMNDN but I can't remember what to do to avoid that error message. (Feb was the last time I even thought about AFRSN)

Thanks in advance.

 

[NECPBXtech30]

how did you break it out?

if you have an entry for 919 then you will have to delete it and break it out from that point...
9190
91910
91911
91912
91913
91914
91915
91916
91917
91918
91919
9192
9193
etc...

"However beautiful the strategy, you should occasionally look at the results." Sir Winston Churchill

 

[phoneguy94]

That is exactly how I broke it out in AMNDN, but it wont let me do it in AFRSN.

When I enter 9190 and press GET, I get this error igit Code Input Number of Digit unmatched. (Error 0x0403)

 

[NECPBXtech30]

did you delete the original 919 entry first? that has to be done before you can break the sequence down further. can you list afrsn and post it? that would be helpful.

"However beautiful the strategy, you should occasionally look at the results." Sir Winston Churchill

 

[phoneguy94]

I forgot to mention I am using MAID in AFRSN.
Do I need to delete 919 for all MAID locations before I can proceed?

 

[NECPBXtech30]

i am not familiar with MAID...if you get data when you put in 919 that is the issue. 919 in afrsn needs to be deleted before you can break it out.

"However beautiful the strategy, you should occasionally look at the results." Sir Winston Churchill