Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

AES Weblm error

Status
Not open for further replies.

amoosh

Technical User
Oct 13, 2010
56
US
HEllo,

I just installed AES 6.3 on a VM and when I tried to log into the Weblm I get an error (Error Code: 404 Request not found).

Any help would be much appreciated.

Thank you.
 
I have just deployed this and it works fine what are you typing in the browser field ????

It needs to be like this obviously 192.168.0.111 is my ip of weblm but you can use the FQDN, the important bit is the port 52233 and the /WebLM extension on the end of the address.

APSS (SME)
ACSS (SME)
ACIS (UC)
 

We've got 3 AES pairs throughout our company and WebLM is working just like above fine. However, one of our pairs just starting throwing a similar error (generally it is a Timeout Error for the page). Haven't figured out what is causing yet.
 
I just tried your suggestion but I was not able to open the WebLM page. Does it have anything to do with license?

Thank you.
 
When I checked the service Controller page I see this " Application Enablement Service is not licensed in the license file". Is this related to the WebLM page issue?

Thanks you
 
Are you trying to access Weblm from AES or direct through the browser??

APSS (SME)
ACSS (SME)
ACIS (UC)
 
if you loaded AES on VMware Hypervisor, you need to deploy WebLM as a seperate OVA template or point the AES server to another WebLM server address.
 
Do I need to have a WebLM server for the AES?
 
I tried that as well but I can't seem to find a solution.
 
Thank you everyone. I am in the process of loading the WebLM.
 
Do I need a license for the WebLM?

Thank you
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top