Advice on Module replacement in middle of cabinet 1

[ndnalibi]

Hi,

I need to replace the 008 module in Slot # 4 with a 400 GS/LS/TTR due to TTR starvation on my system. There are a few extensions programmed onto it, but they are not being used. Does anyone see anything dangerous about this? I want to avoid having to reprogram all of the extensions if possible.

Thanks for your help. (report data edited for readablity)

Bill

A Slot # 1: 408 GS/LS-MLX
A Slot # 2: 408 GS/LS-MLX
A Slot # 3: 408 GS/LS-MLX
A Slot # 4: 008
A Slot # 5: 008 MLX
A Slot # 6: 408 GS/LS-MLX
A Slot # 7: 408 GS/LS-MLX
A Slot # 8: 408 GS/LS-MLX
A Slot # 9: 408 GS/LS-MLX
A Slot # 10: 012
A Slot # 11: 400 GS/LS/TTR

1/ 1 104 PAM 1/21 7300
1/ 2 116 ADRIANA 1/22 7301
1/ 3 119 MIKE MC 1/23 7302
1/ 4 115 SUE 1/24 7303
1/ 5 102 DEBBIE 1/25 7304
1/ 6 123 ANGIE K 1/26 7305
1/ 7 114 ANGIE H 1/27 7306
1/ 8 108 JOHN 1/28 7307
2/ 1 141 WF PIT 2/21 7308
2/ 2 101 WILLIAM 2/22 7309
2/ 3 129 FRANK 2/23 7310
2/ 4 113 DANY 2/24 7311
2/ 5 128 JAKE 2/25 7312
2/ 6 127 DELTA 2/26 7313
2/ 7 125 TIM H 2/27 7314
2/ 8 132 KITCHEN 2/28 7315
3/ 1 130 PAULET 3/21 7316
3/ 2 103 POLLY 3/22 7317
3/ 3 105 JEFF 3/23 7318
3/ 4 124 PLATES 3/24 7319
3/ 5 117 BOB 3/25 7320
3/ 6 118 JULIE 3/26 7321
3/ 7 133 PRESSRM 3/27 7322
3/ 8 112 MARK 3/28 7323
4/ 1 100 SALES 4/ 2 7103 SALES
4/ 3 134 PREPRES 4/ 4 7101 PRESSRM
4/ 5 7120 4/ 6 7102 PRESSRM
4/ 7 7108 XXXXXXX 4/ 8 131 CO ORD
5/ 1 140 MICHELE 5/21 7332
5/ 2 142 SALLY 5/22 7333
5/ 3 110 MIKE 5/23 7334
5/ 4 107 LAUREL 5/24 7335
5/ 5 121 CHRIS 5/25 7336
5/ 6 122 LISETTE 5/26 7337
5/ 7 109 5/27 7338
5/ 8 126 JUSTIN 5/28 7339
6/ 1 152 6/21 7340
6/ 2 151 KITCH2 6/22 7341
6/ 3 150 DAVE G 6/23 7342
6/ 4 143 6/24 7343
6/ 5 144 NEXPRES 6/25 7344
6/ 6 145 BK CONF 6/26 7345
6/ 7 146 BILL O 6/27 7346
6/ 8 147 TOM 6/28 7347
7/ 1 153 7/21 7348
7/ 2 154 7/22 7349
7/ 3 155 7/23 7350
7/ 4 156 7/24 7351
7/ 5 157 NEXPRES 7/25 7352
7/ 6 158 DIGI 7/26 7353
7/ 7 159 7/27 7354
7/ 8 160 SHIPPIN 7/28 7355
8/ 1 161 LORI L 8/21 7356
8/ 2 162 8/22 7357
8/ 3 163 8/23 7358
8/ 4 164 8/24 7359
8/ 5 165 8/25 7360
8/ 6 166 8/26 7361
8/ 7 167 8/27 7362
8/ 8 168 SM74 8/28 7363
9/ 1 169 9/21 7364
9/ 2 170 9/22 7365
9/ 3 171 9/23 7366
9/ 4 172 9/24 7367
9/ 5 173 9/25 7368
9/ 6 174 9/26 7369
9/ 7 175 9/27 7370
9/ 8 176 9/28 7371
10/ 1 7172 10/ 2 7173
10/ 3 7174 10/ 4 7175
10/ 5 7176 10/ 6 7177
10/ 7 7178 10/ 8 7179
10/ 9 7180 10/10 7181
10/11 7182 10/12 7183

 

[tdaugirdas]

You will need to reprogram/renumber all of the extentions after the 008 card - because the extention numbering will change as soon as you replace the 008 with the 400 TTR and do a board renumber. The extention numbering after the 400 will start with whatever was on the original 008 and so on - with all of the extention ports to the right of the newly added 400 card.

Tom Daugirdas,
President
STCG, Inc.
stcg.com

 

[ndnalibi]

Thanks as always Tom.

That's what I was afraid of.

Would the extension programming remain constant? ie after renumbering, and reconnecting the port to the corresponding phone, will the labeling, buttons, etc still be valid, or will everything need to be reprogrammed?

Bill

 

[tdaugirdas]

The buttons should not change - just the extention numbers - and - if the phones were in groups - it will mess up the members in the groups.

Tom Daugirdas,
President
STCG, Inc.
stcg.com

 

[PBXJay]

I see why they moved away from this product. Stable but don't try to change anything once programed LOL

 

[merlinman]

For a great deal less heartburn and problems, just replace the 012 Module in slot 10 with an 016-TTR, which has 4 TTR's.

That is, if your processor is new enough.

 

[ndnalibi]

Thanks, I'm running a 3.1 which won't support the 016-TTR.

I think I'll just need to bite the bullet and make a weekend of it.

Bill