FrankSmith
Vendor
Anyone else having an issue with this. I have a hunt group in one switch that overflows to a huntgroup in another switch. When it covers to vm it covers to some funky mailbox. Sysmon shows #AR:3.1
628537581mS CMLOGGING: CALL:2008/09/2820:43,00:00:12,000,,I,AR:3.1,#AR:3.1,,,,0,,""n/a,0
628537581mS CD: CALL: 9.200.1 BState=Connected Cut=2 Music=0.0 Aend="Line 9" (0.0) Bend="IncomingAA(280)" [VoiceMail] (6.8) CalledNum=#AR:3.1 (FwdNight) CallingNum= () Internal=0 Time=12348 AState=Idle
628537581mS CD: CALL: 9.200.1 Deleted
628537583mS CMExtnTx: v=RAS, p1=0
Systems Status shows the incoming DID as #31. So trying to trick it I created an incoming call route using the incoming group ID of the IP Trunk, #31 incoming digits then routed it to a short code of my auto attendant. That didn't work. At least i got a chuckle out of it while i was programming it. Lest anyone ask I do have a group setup in vmpro for IncomingAA with a goto action to the auto attendant.
Both Systems
IP 406 4.1 12
628537581mS CMLOGGING: CALL:2008/09/2820:43,00:00:12,000,,I,AR:3.1,#AR:3.1,,,,0,,""n/a,0
628537581mS CD: CALL: 9.200.1 BState=Connected Cut=2 Music=0.0 Aend="Line 9" (0.0) Bend="IncomingAA(280)" [VoiceMail] (6.8) CalledNum=#AR:3.1 (FwdNight) CallingNum= () Internal=0 Time=12348 AState=Idle
628537581mS CD: CALL: 9.200.1 Deleted
628537583mS CMExtnTx: v=RAS, p1=0
Systems Status shows the incoming DID as #31. So trying to trick it I created an incoming call route using the incoming group ID of the IP Trunk, #31 incoming digits then routed it to a short code of my auto attendant. That didn't work. At least i got a chuckle out of it while i was programming it. Lest anyone ask I do have a group setup in vmpro for IncomingAA with a goto action to the auto attendant.
Both Systems
IP 406 4.1 12
