Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Administration Password for i2007 telephone?

Status
Not open for further replies.

craigsarmy

IS-IT--Management
Jan 19, 2006
63
0
0
US
Anyone know a good Administration Password for i2007 telephone? I want to access the configuration but the phone is stuck on starting DHCP....
 
power off the phone and power it back on, wait till you see the nortel logo and quickly press all of the softkey under the lcd from left to right, if done properly and quick enough, you'll be in the configuration screen.

there is also the nintendo key method, press: mute, up, down, up, down, up, mute, 9, release.
 
Thanks Jane, I must be doing something wrong. I'm not sure which buttons. Do you press and hold or press and release?
 

U r right firebird, try with this password 26567*738
 
Took from NTPs 553-3001-368_7.00.pdt page 154:

a. To use local power, plug the Global power adapter into the nearest
power outlet. Refer to Table 17 on page 147.
b. Connect the power jack as shown in Figure 15 on page 153.
You will hear a tone shortly before the IP Phone is ready to start the Nortel
IP telephone application.
6 Once the application has loaded and started, Nortel will appear in the
middle of the screen. Immediately press the following keys in sequence:
a. 0
b. 0
c. 7
d. star (*)
Note: If you miss part of the configuration, unplug the phone from the
power for a few seconds and redo this step.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top