Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Admin server install from iso and vmware

Status
Not open for further replies.

ringvoltage

Vendor
Nov 12, 2012
40
US
I am using iso c110-11.0.4100.11.iso for the installation
VMWare 6.7.0
HP Proliant gl160 gen10

I have the host setup for 64 bit (tried 32 as well) CentOS 6

The installation runs fine. On reboot, I get a kernel pacnic. 'Not syncing - attempted to kill init'

Does anyone have any suggestions on what settings I am missing or should be using?
Maybe a different iso?
Is there another VMHost setting I should be using or maybe someone knows that this will never work which would save me years as well.

Thanks.
 
Neither of the above. VMware install is only supported using the OVA (you can use the ISO for subsequent upgrades but not the initial installation, there are some differences about what gets installed and virtual drive partitioning).

Stuck in a never ending cycle of file copying.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top