Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Adjusting time

Status
Not open for further replies.

champ203

Vendor
Sep 6, 2005
31
US
Question i have changed the time on the vm server but the ip office has not updated. Verified in the manager that the time server is set for the vm server. Any ideas as to why this is not updating. This is a 406 4.0 (7). I am not onsite so what i keep checking is the time window in the system status.
 
Try sending a config to the system to force it, also you can set the time from a handset if you set it to "system phone"

ACS - IP Office Implement
 
Set one of the users to sytem phone.

then typ on the phone *9000* HOLD

y1pzZTEUdok1vrI5cLb3FdPX4PgTPlSONkb5WPjz0x50etSujaMSmhdRCbOx9vASnrRNzzXv0IxNQA

___________________________________________
It works! Now if only I could remember what I did...
___________________________________________
 
That was later, thougt 4.1 before the *9000* would work

Upgrade to 4.2 and set the Admin 2 button for the user so they can change it there selfs :)


ACA - Implement IP Office
ACS - Implement IP Office
ACA - Voice Services Management
______________
Women and cats can do as they please and men and dogs should relax and get used to the idea!
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top