Hello, I copied and pasted the below post I found. I wanted to erase the data from a voice mail. I did exactly what was in the response from norstarboy125, and now ALL the features are gone including 983. Any thoughts?
TheMitelGuy (IS/IT--Management)
20 Apr 07 20:30
Is there a quick way to erase all programming on a Nortel voice mail. It's going from ABC Co. to XYZ Co. and they need to start fresh? I've never had to do this...
norstarboy125 (Vendor)
22 Apr 07 4:13
log into voicemail feat. 983 pswd 12xxxx or 102xxxx etc. depending on your dn lengh then press 1 pswd REINSTALL that will erase all old data. Then you will have to do a Feat. 983 pswd CONFIG after the vmail is reset, then your good to go.
TheMitelGuy (IS/IT--Management)
20 Apr 07 20:30
Is there a quick way to erase all programming on a Nortel voice mail. It's going from ABC Co. to XYZ Co. and they need to start fresh? I've never had to do this...
norstarboy125 (Vendor)
22 Apr 07 4:13
log into voicemail feat. 983 pswd 12xxxx or 102xxxx etc. depending on your dn lengh then press 1 pswd REINSTALL that will erase all old data. Then you will have to do a Feat. 983 pswd CONFIG after the vmail is reset, then your good to go.