Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Adding VM to IP403, 406, 412 cabinets

Status
Not open for further replies.

classydreams

Vendor
Jun 27, 2014
122
US
What is required to add basic VM and AA to an older IPO403, 405 & 412? I do not see a slot for the SD card to go into like the IP500 cabinet? Thanks
 
Voicemail lite, PC software delivered on the admin cd.
Run setup select custom setup and add vmlite.
It is not a service so it will only run on a PC where a user must be logged on all the time.
There is only one version which is 2.1
 
Thank you!

Does the IP4xx V2 cabinets support Embedded VM I see that there is an SD slot in the front.
 
Yes and maybe you can buy one on eBay, I have on or two lying around somewhere
It is for IP406v2 and IP500v1
 
Be aware... It is a CF card and not a SD card. If you look at eBay...
 
I didn't check the link but wanted to share that information with the OP because he always talks about a SD card. ;-)
 
Thanks. By the way will a 2420 and 5420 digital sets work on the IPO400 series V1 ad V2 cabinets?
 
VM Pro is also available on the 400 series IP Office units
VM Lite provides mailboxes only no AA features, onlt the IP406DS & the SOE support embedded VM (actually the IP401 could be configured to use a Smart media card for embedded VM but the chances of finding one is remote)

A Maintenance contract is essential, not a Luxury.
Do things on the cheap & it will cost you dear
 
I have 2 SOE embedded VM cards.... almost as rare as fresh water on Mars
waterOnMars-274x300.jpg
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top