Adding Virtual TNs for IP Clients to a CS1K M SG

[Gallo69]

I need to add IP sets to my CS1000M SG but when I go to LD 20 and do LUVU on tns I only show 3 virtual TNs, what does that mean and how can I add more IP Clients?

TYPE 2000 TN 028 0 08 14 8D VCE
TYPE 2000 TN 028 0 08 15 8D VCE
TYPE 2000 TN 028 0 10 06 8D VCE
TYPE 2000 TN 028 0 10 14 8D VCE
TYPE I2000 TN 152 0 01 29 VIRTUAL 8D VCE
TYPE I2000 TN 152 0 01 30 VIRTUAL 8D VCE
TYPE I2000 TN 152 0 01 31 VIRTUAL 8D VCE
TYPE 500 TN 156 0 00 03 PHANTOM 4D
TYPE 500 TN 156 0 00 04 PHANTOM 4D
TYPE 500 TN 156 0 00 05 PHANTOM 4D
TYPE 500 TN 156 0 00 06 PHANTOM 4D
TYPE 500 TN 156 0 00 07 PHANTOM 4D

 

[yyrkroon]

start building on the next card 152-0-2-0

 

[bigindian65]

how many do you have now? do you need to add a virtual loop? Have you stat loop shelf card in 32 or 11?

Mato' Was'aka

 

[Gallo69]

bUT THERE IS NO CARD SO JUST START BUILDING, WHEN DO I RUN OUT? HOW DO I KNOW HOW MANY LEFT?

 

[yyrkroon]

you run out when you run out of loops - it's virtual, so yes, there's no card

 

[bigindian65]

ip lics. do an slt in ld 22

prt your SUPL in ld 97, that is where you would add another loop if you need too. if you add a Vloop, it is the same principle as a regular Superloop i e, 92-0-0 thru 92 0 15 with 0-15 TNs on each card.

Mato' Was'aka

 

[yyrkroon]

TYPE I2000 TN 152 0 01 29 VIRTUAL 8D VCE
TYPE I2000 TN 152 0 01 30 VIRTUAL 8D VCE
TYPE I2000 TN 152 0 01 31 VIRTUAL 8D VCE

you already have a virtual supl define it's 152 - so unless you have already used up card virtual card 2-15, start building on the next card. Once you build out the first TN, the rest will populate.

 

[cmoegie]

You can view the unused cards in any loop.
Go to LD 20
enter LUC and the loop number.
once you know the next unused card start building

 

[Gallo69]

Got it, Thank you Gentlemen and make it a great weekend.