Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Adding up to 10 phones to IP500, expansion questions 3

Status
Not open for further replies.

khartm

Systems Engineer
Oct 17, 2017
11
US
Hi there as far as I can tell there is 3 expansion modules already on the system. When I look under control unit I see...

DIGSTA8/PRIS U 8 used
DIGSTA8 8 used
COMBO6210/ATM4 I think I have 2 free here

I read that there can only be 3 DIGSTA8's on the system, is this correct? Is there an expansion card that is Digital Stations only? Or do I need to look into the separate 16 or 30 Digital Station Modules?


Thank you!
 
The maximum number of digital phones supported on the 500V2 chassis is 30, thus 3 DS8's for 24 and a Combo for 6 would max the 500V2 out in terms of both physical real estate and channel capacity. Therefore you can add a third DS8.

 
So I can have 3 DS8 cards plus the combo card? Is there any additional licensing to add a DS8?
 
Nope, just the card.

APSS/ACIS/ACSS-SME
not arrogant, just succinct.
 
Thank you, but now that I think about it, might have to add 12 phones, so Im back to the separate module I guess.
 
No worries, thanks for the star. I'll hand it on to nortel4ever seeing as he answered your question in a lot more detail than i did.

APSS/ACIS/ACSS-SME
not arrogant, just succinct.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top