Adding two paging speaker ports to an all page group

[teltech54]

Is it possible to add two paging speaker extension ports to a single hunt group with users in it? I tried this and both paging ports just ring. When I add users the users hear the page but nothing over the page ports. Take all users out and put one or the other page port in and it pages to the single port (so both are working but not in tandem).

Saw another post where you take a phones speaker leads and use them as the second input to an amp and put phone in group as a user. Then you can page to both zones. Is this the only way?

(Need to be able to page both zones with users and single zone with users)

"Zone 1" Overhead paging in one building and all users in building 1.
"Zone 2" Overhead paging in two buildings and all users in building 1.
Different short codes

 

[TouchToneTommy]

If you use analog STATION ports, configured for loudspeaker paging, you can include them in hunt groups used for paging, and achieve simultaneous paging.

 

[teltech54]

I used 2 analog station ports configured for loudspeaker paging. When both are included in the same group both phones just ring (according to SSA). If I take either phone out and leave one in, the paging works.