adding own Webpart -problems

[Cordoba1405]

Hello,

I still have the Problem that I can't add my own Webparts to my Sharepoint Site although i even changed the code in the Webpart (in the cs-File of C#). The Webpart was running before the Code-changes.
The trust-level of my web.config is Full and i have signed the webpart with a strong key.

Could it be possible that there is something like a checksum at the webparts, so that you can not simply modify the Code in a Webpart.

Thanks for help.

Cordoba

 

[ChaserNL]

Have you also declared the webpart as safe with your specific strong key? (and is the assembly available in either the BIN of the website or in the GAC?)

 

[ChaserNL]

In addition if you have specified an auto incrementing version nr. (ie 1.0.* instead of 1.0.0.0) in the assembly info, you should make sure you use the current version nr for safe declaration.

 

[Cordoba1405]

I had imported the webpart with the stsadm-Tool (so the assembly is in the BIN-Directory of Sharepoint and the entry <Safe Control> in the web.config-file is done automaticly)
The Assembly is strongly-named and the StrongKeyName-File is written in the AssemblyInfo.cs-File.

But I will check your Tip with the Version nr. !
Sometimes tt's very tricky to import an own Webpart in Sharepoint!