Adding DBA module to I2004 1

[Redwoodbob]

I'm attempting to add a DBA mod to an I2004 and keep getting errors.

In LD11

REQ: chg
TYPE: i2004
TN 61 20
ECHG yes
ITEM dba SCH1956
ITEM kba SCH1957

>ERR SCH1956

SCH1956
You are attempting to configure a DBA with a KBA attached to the set. First input 0 with KBA prompt and the configure 1 with DBA prompt.

SCH1957
You are attempting to configure a KBA with a DBA attached to the set. First input 0 with DBA prompt and the configure 1 with KBA prompt.

However, I DO NOT have the module attached and this unit has not previously been configured for the module.

I know its likely something that I am doing but if someone could assist-a-n00b with a step-by-step it would be greatly appreciated.

Regards

 

[allenmac]

At the ITEM prompt, try KEM 1.

 

[Redwoodbob]

That was it. Thanks for the info.

 

[allenmac]

No problem. Glad to help.