Never added key codes before, after looking at other posts not so sure I feel comfortable doing it.
I have the codes on paper and the disk, is it really that tricky to do?
no, it is as simple as removing a phone.. put the disk in the door, enter the command and watch the screen... i usually do it during the work day and the customer never knows it happens.. kman is a little harder then knew.. with the disk, knew f0 in 143
couple of ways, ld 137 stat.. the way i tell is to look at the cni's next to the cpu.. one will have all red lights, those cni's are off so the other side is active...for example.. two cni on each core.. zero has 4 red lamps, the other has 1 red... that means that 1 is active and you have 3 groups and your in an 81c.. just by looking at the lamps
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.