Adding an attendant console

[riscyrich]

Can anyone give me a quick run down of adding an attendant console to a CS1000T.

Never added one before and the CS won't let me add a M2250.

I've got as far as adding in the digi card, wiring up the amphernol cables, kroned out two pairs (blue and orange) etc.

The phone is live etc, now I need to do the config...

Cheers

Rich

 

[GHTROUT]

LD 10 for Analog TNs
LD 11 for Digital TNs
LD 12 for Attendant Consoles

LD 20 for Printing




~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]

 

[GHTROUT]

Besides the two pairs, here is the wiring

http://www.ghtrout.com/ghtrout/files/2250wiring.pdf

~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]

 

[speckledhen]

Don't forget you need to DGTL Tns for the console, Here is a print from Ive done in the past.
Setting up a new console and assigning features to keys

>ld 12
ATT000
MEM AVAIL: (U/P): 1272632 USED U P: 82472 37535 TOT: 1392639
DISK RECS AVAIL: 465
TNS AVAIL: 2483 USED: 17 TOT: 2500
ATTENDANT CONSOLES AVAIL: 2500 USED: 0 TOT: 2500
REQ new
TYPE 2250
TN 4 10 (or whatever TN you use
SETN 4 11 (or whatever)
CUST 0
ANUM 1
IADN
SSU
ICDR
CPND
LANG
SGRP
QTHM
AADN
DAPC
KEY 00 bvr (Busy Verify)
KEY 01 bki (Break In)
KEY 02 dps (Display Source)
KEY 03 dpd (Display Destination)
KEY 04 rdl (Redial Stored Number)
KEY 06 prk (Call Park)
KEY 07 ssc 0010 (System Speed Controller (default list 10))
KEY 08 mtm (Modify Time)
KEY 09 prg (Programming)
KEY 18 mdt (Modify Date)
KEY

 

[riscyrich]

Thanks guys, I'll give it a go !

Cheers

Rich