Adding a wireless router and subnetting

[NewtonIP]

Hi, thanks in advance to anyone who can help with this problem. I have a Netgear router with 8 ports and have just added a US Robotics Wireless Router on one of those ports.
The seven computers directly attached to the Netgear are fine but I cannot see anyone attached through the wireless router. At the moment the Ip addresses are all within the same range of 192.168.123.*

Do I have to subnet or is it just getting the routers to talk to each other?

Very new to all this and would really appreciate some help.

Many Thanks

New to IP

 

[ElijahBaley]

Hi,

You probably need a crossover cable to connect the two switches port to port.

EB

 

[NewtonIP]

Thanks Elija, sorted that out.