adding a site in aam

[buthead]

Greetings,
Let me start by saying I no nothing about AAM. Our current VM is Octel Serenade. 1992, old yet "bulletproof". We have two buildings with two Options that all share the Octel. One AC, one NXX, and a lot of DID's. The AAM is up and running with my "test group". Before I build more MB's I was thinking about dividing up the mailboxes by buildings. The AAM has "Sites". When I program a new site/building, it wants a unique prefix/NXX. I get the impression that this is when I would be adding different AC's/NXX's. Since we all share the same one, is there another way to segregate MB's by location? Thanks in advance. I know I will have more questions in the near future.

 

[dialtonebone]

Bulletproof until 2015

https://downloads.avaya.com/css/P8/documents/100145509

Are you trying to segregate by location for reporting purposes, or is this more for a technical/tenant partitioning reason? If only for reporting, you can use the miscellaneous fields in the subscriber settings.

 

[buthead]

Thanks Randy. Ah yes...the good old time stamp. Takes many of us back to the Y2K scam/era. I'll check out the subscriber settings. My reasons are more for reporting. Thanks again Randy