adding a module 1

[sammy1563]

i am about to add a ds 30 to an existing 403 w/ds 30 & a16 analog can i just add the ds 30 next in line or do i have to move the the 16 analog.

 

[sizbut]

The order in which modules are attached to the expansion ports is not supposed to be significant, so you don't need to rearrange the existing modules (which would result in a painful bunch of configuration changes also).

Just add the new module to any of the free expansion ports. [and write the port number somewhere on the lid with indelible marker]

 

[Atraxx]

External analog line on IPO-403?

I want to connect an analog telephone-line to a IPO-403.
I have a DSL-modem with Voip and there is only an analog line available to connect a analog station.

I want that line connected to the IPO-403 as a external line but, as far i know, i can only connect ISDN-bri lines.

Is there an expansion-board available for external analog (annex-a) line(s)?

Any suggestions for this case?

Thanks,
Alex (The Netherlands)

 

[Atraxx]

Sorry, i wrote a new question in the wrong window... :-(