Adding 2 port fibre card and 0x16 to MICS

[iswsystems]

Hi there, planning to do this in a few days. I am used to programming norstars, but have never done a physical upgrade like this.

We want to add a 2 port fibre card to an MICS 8x32, so that we can add a single M0X16 and add more stations.

Wiring and printout won't be an issue.

Just want to know how to add the hardware without locking the cabinet into maintenance and potentially losing all the current config data. This is 7.0 or never MICS.

Thanks

 

[curlycord]

Power down, insert card, power up.
0X16 plugs to the lower port.



=----(((((((((()----=
curlycord

http://www.curlycord.com