I thought there would be a choice in the control panel somewhere but there is not any. In Windows I just goto the "control panel" then "printers" the "add new printer", select the driver from a list or disk, and your done with it.
Take the driver (actually an extension) and put in the extensions folder in the System folder. Hopefully you have a PPD file also. This goes in the Printer Descriptions folder that sits inside the Extensions folder as well. It will then show up in the chooser. You may need to restart if you do not see it in the chooser.
I actually got it installed by going to HP's website and downloading the driver from there and then used their installer program. I can now see it in the chooser. However, the problem now is that everytime I try to print or try to look at the printer settings, it keeps trying to find the printer on the network. It is not on the network, it is a local printer on a USB port. But there are no options anywhere in the chooser to specify that. The only options there are to try to connect thru TCP/IP.
Where do I tell it that is a local printer? Why would think it needs to connect to it on the network to begin with. I never specified anything during the installation that it was on a network.
Do you see a HP printer icon in the chooser? When you select the icon there should be an option to select "via USB". If needed use Apple System profiler and verify that the computer sees the printer at the USB port.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.