Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Add line to button on mics

Status
Not open for further replies.

wave33

Technical User
Feb 7, 2006
14
US
I'm trying to program a 6.1 mics through a frad. The problem I have is I don't have a clue on how to move a line to a different button after I program it.
Thanks for any info!!

 
Thanks for the code,but i'm not on site I'm dialing in through the RAD. I don't see a feature code to move the line through
programing when I'm in button programing. Thats my big problem. Thanks for more info
 
You'll either need to tell the customer to do it with feature *81 or you can wipe all of the lines off of the phone and program them in 1 by 1 in the order that you want them to appear. For example....if you want line 2 on the top button and line 1 beneath it, take off all of the appearances and go back in and program an appearance for line 2. Release out of the programming and go back into it to program an appearance for line 1. that should put line 2 at the top and line 1 beneath it.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top