Add line to button on mics

[wave33]

I'm trying to program a 6.1 mics through a frad. The problem I have is I don't have a clue on how to move a line to a different button after I program it.
Thanks for any info!!

 

[exsmogger]

Use Feature *81 at the set in question to move line buttons.

Brian Cox

http://www.jandjcommunications.com

 

[wave33]

Thanks for the code,but i'm not on site I'm dialing in through the RAD. I don't see a feature code to move the line through
programing when I'm in button programing. Thats my big problem. Thanks for more info

 

[deelee74]

You'll either need to tell the customer to do it with feature *81 or you can wipe all of the lines off of the phone and program them in 1 by 1 in the order that you want them to appear. For example....if you want line 2 on the top button and line 1 beneath it, take off all of the appearances and go back in and program an appearance for line 2. Release out of the programming and go back into it to program an appearance for line 1. that should put line 2 at the top and line 1 beneath it.