add dns

[ferfevisa]

I got some DN's and a need to add more, somebody knows which commands I have to use ?,
Thanks for your help

 

[KCFLHRC]

As long as the DN is unused just program the new one's.

 

[ferfevisa]

i got DN's 2200, 2201, 2202, 2203 2204 2205 2206 2207 2208 2209 2210
2211 2212 2213 2214 2215 2216 2217 2218 2219 2220
2221 2222 2223 2224 2225 2226 2227 2228 2229 2230


2241 2242 2243 2244 2245 2246 2247 2248 2249 2250


i want to use DN's 2231 2232 2233 2234 2235 2236 2237 2238 2238 2239, but when i execute ld 20 program, the dns 2230....2239
do not are displayed, how can i do to use these DN's ? i will need to configure these Dn's in order to
can use it ?

 

[KCFLHRC]

What do you mean they are not displayed. Just program the phone in LD 20 and when you get to the key assignment just build it as SCR XXXX and you are done. The DN's are never displayed anywhere. You just program them when you build the phone and that's it.

 

[ferfevisa]

i think i do not explain correctly. i need to use DN's in the range of 2340 to 2349 ( actually this range of DN's it is not in use ), but when i execute the program
ld 20
req prt
type ludn
cust 0
dn enter

this is the result

DN

CUSTOMER 00 - UNUSED DNS:
10 11 12 13 14 15 16 17 18 190
192 193 194 195 196 197 198 199 20 21
2200 2206 2208 2211 2220 2236 2237 2238 2239 2266
2267 2268 2288 2289 2298 2304 2305 2306 2307 2308
2316 2317 2318 2319 2324 2325 2326 2327 2328 2329
234 2351 2353 2354 2355 2356 2357 2358 2359 236
237 238 239 24 25 26 27 28 29 3
5 7002 7003 7004 7006 7007 7008 7009 701 702
703 704 705 706 707 708 709 7100 7101 7103
7104 7105 7106 7107 7108 7109 7118 7119 712 713
714 7158 7159 716 717 718 719 7203 7207 7208
7209 7211 7212 7213 7214 7215 7216 7217 7218 7219
722 723 7241 7242 7243 7244 7245 7246 7247 7248
7249 725 726 727 728 729 73 74 75 76
77 791 792 793 794 795 796 797 798 799
the range of DN's 2340 to 2349 it is not displayed ( and these DN's are not assing to anybody ) i suppose that program ld 20 should display DN's available ( unused )
what can i do in order to can use these range of DN's ?

 

[ftr3363]

looking at your printout 234 is unused which means that any number (2340-2349) would be available for use.

 

[ferfevisa]

Thank you ftr3363 for help, we use the DN's with 4 digits (for example 2200, 2254 2235 so on ) i dont know what means the numbers displayed with 3 digits.

 

[KCFLHRC]

234 is included in your print out. That means 2340 thru 2349 is unused.

 

[ferfevisa]

OOOOOK perfect, i understand thanks a lot, the problem was that i dont know whats means 234, but now with your appreciate help i can try to configure these DN's THANKS A LOT !!!!
( SORRY FOR MY ENGLISH I DONT KNOW TO MUCH ENGLISH , TWICE TNAHKS !!!

 

[KCFLHRC]

No problem, if you had one phone programmed as 2340 then your LUDN print out would look different. It would show 2341,2342,2343 etc. However since there are no 234x numbers programmed the switch prints only the first 3 digits of that range. Hope this makes sense, kinda confusing I know.