Add Boot firmware

[TXPOD]

I've downloaded the new 11A firmware fine from directions below. Can someone help with 'how to' download the boot firmware? I followed the same procedure as to download the NIF11a for the NIU2. I see the file:
<fidapATH=/SYSN/USR1/SES/CN/FW/*.*;
FILE/DIRECTORY DATA
FILE FITYPE LINKS USERID FISIZE DATE
19112-rys10272 F 1 2 1554697 19FEB09 14:32
NIFR11A F 1 2 1068629 19FEB09 14:02


First, the NIU2 board must have application FW R11A.
1. Transfer the file to NIU with ftp.
2. Load the application code to NIU with CNBLI.
3. Switch and confirm with CNBSI and CNBCI.
DOWNLOAD INFORMATION
DOWNLOAD EXECUTED SUCCESSFULLY IN LIM 9
DOWNLOAD COMPLETED
EXECUTED

Download boot FW R2A using the following commands:
1. Transfer the boot file to NIU with ftp.
2. Load the boot code to NIU with CNBLI.
3. Confirm with CNBCI.
DOWNLOAD INFORMATION
FILE HANDLING ERROR, FILE DOES NOT EXIST
EXECUTION ABORTED

 

[ceejay55]

Try making boot name smaller -i.e i used Nif2.wd and it worked fine

 

[whosrdaddy]

your problem is CAPS, the filesystem allows lower casing via FTP but via Command shell every character will be uppercased, retransmit the file (name in uppercase without the "-" char) and it will work.


/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[TXPOD]

Thanks Daddy and CJ. It was a combination most likely of both your answers. I added to file .WD and RYSR2A.WD. I do notice when you send in lower case it does make it upper case. I changed it anyhow. Thank You again.
<CNBLIATH=/SYSN/USR1/SES/CN/FW/19112-rys10272,BPOS=9-1-60;
CNBLIATH=/SYSN/USR1/SES/CN/FW/19112-RYS10272,BPOS=9-1-60;
SURE? (YES/NO)
<y;
ORDERED