Activate new Line in PAM

[randaddyz]

I have a NEAX 2000 IVS(2)/ IPS and need to activate 5 new extensions. The wiring is complete and I have used command 10 to assign a LEN number to an extension in PAM but what other codes do I need to use to get the analog working with a dial tone. the len that i am using for the first is 0123 and the extension 2101.

Any help anyone could provide me would be great.



Thanks

 

[OzzieGeorge]

After doing Cmd 10 you should have dialtone. The other commands simply modify the way the station works.

 

[jerrytech1]

Did the LED for that LEN go out?

 

[VDG]

Are you adding Dterm (Electronic) sets or Single Line?

If Single Line then yes you should have dialtone, for a Dterm set there is a little more to do.

1. The len needs to be assigned as F2101
10>0123:F2101-
2 Assign key data using command 90
9000>2101,01:2101-
3 Asing a Prime Line so that when you pickup the handset a line is chosen
93>2101:2101-

That should help.