activate CLID on MICS 4.0 2

[serge9]

how to activate CLID on MICS 4.0 /voice mail appilication module 4.0.04A
Line Cards are CLI
incoming Calls show Line 1 or line 2 depending on which line it came on

Thanks

 

[serge9]

under Terminals and Sets in programming, telco features
there is no feature assign
there is class assignment
under terminal and sets for set 200Teleco Featur Class assignment
show line
List Line001
call log set:Y
Extl Vmsge set:y
and
under terminal and sets,
Teleco feautures,
1st display :number
Caller ID: Y

 

[serge9]

also f811 does not work
f811 display back line001
thanks

 

[hawks]

Sorry but I have to ask the obvious, have you verified that Telco is sending the information? Don't just take their word for it I've been back and forth with them in the past on this very issue.

 

[exsmogger]

Try looking under Lines - Trunk/Line Data. Enter line 001. Scroll to CLID set. Press SHOW. Assign 200. Repeat for each line. This should get it. Older MICS was a pain for caller ID.

Brian Cox
Oregon Phone

http://www.OregonPhone.com

 

[serge9]

i will try exsmogger and Hawks suggetion tomorrow
will connect a regular analog phone with display to line 1 at the D-mark
that will tell us if the CO is sending the digits
if i remember well
under lines
trunk/line data
trunk type: loop
line typeool A
Name: line 001
will check it tomorrow
Thanks all

 

[serge9]

i checked under lines
all is well
CLID set 200

connected ana analog set with display direct to the line at the D-marc, called the line, no digits ??
Bell did it again
They move the lines from one location to another
and changed the lines to plain OLD POT
theu promised to correct the situation soon!

will test again in a few days
Thanks

 

[exsmogger]

You'd think that all lines would have CLID these days. At least now I'm up to snuff on programming the MICS for caller ID.

Brian Cox
Oregon Phone

http://www.OregonPhone.com

 

[serge9]

yes, Bell is strang, very strang!
Bell corrected the situation and send the digits

now, all is well, we can see CLID

Thanks All