ACS R7 Switch from Key to Hybrid Mode

[Bufftel]

Need to switch a Partner ACS R7 from KEY mode to HYBRID mode to allow Avaya 3910 wireless set to use Line Pool buttons (880) for warehouse user.

Program code #198 (Mode of Operation) asks for
'PSWD and option num'(1=key; 2=hybrid)

Program code #403 (System Password) set to 4 digit number.
Entering anything after the #198 returns to 'SYSTEM PROGRAMMING' on the display.

What's missing by doing it through phone programming?

I can change it from KEY to HYBRID mode just fine by using the Remote Admin programming by uploading the change to HYBRID mode (under SYSTEM PARAMETERS and SYSTEM MODE) and then restoring the system translations.

Thanks! Just curious.

 

[1043]

http://support.avaya.com/elmodocs2/partner_acs/r7/456803_6.pdf

its in the book page 146

 

[1043]

The question is. What does it spell backwards??

 

[Bufftel]

Thanks 1043!

Guess, I didn't look long enough!
The Quick Reference Guide (Issue 6, July 2004 pg 101)
only had the 'system password' reference, so I assumed it
was #403. Thanks again.