Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ACS R7 and 308 help

Status
Not open for further replies.

brianb1998

Technical User
Nov 29, 2005
17
US
ok so i have everything working on the main card line 1 through line 5 the extensions on the 308 card see the first lines but none of the extensions see the 6th line pluged into the 308 do i need to program the extension ports to see line 6 or how can i go about getting this to work
 
brian,

in system programming do a #104 and assign the 6th line.

you will be ok from there.

dizzy
 
after #104 it just says number of lines 5 lines how do i change that to see 6 lines
 
As long as you want all extensions to ring on all lines, using #104 after the initial installation/programming is fine - however, if you have some extensions set for Delayed Ring or No Ring, you'd be better off using #391-XX-06-1, then changing the ringing settings as needed.

Don't forget to add it to the V.M. dist. group if necessary.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top