ACS R7 and 308 help

[brianb1998]

ok so i have everything working on the main card line 1 through line 5 the extensions on the 308 card see the first lines but none of the extensions see the 6th line pluged into the 308 do i need to program the extension ports to see line 6 or how can i go about getting this to work

 

[dizzyphil]

brian,

in system programming do a #104 and assign the 6th line.

you will be ok from there.

dizzy

 

[brianb1998]

ok will do thanks for the info

 

[brianb1998]

after #104 it just says number of lines 5 lines how do i change that to see 6 lines

 

[brianb1998]

ok i got it thanks

 

[TouchToneTommy]

As long as you want all extensions to ring on all lines, using #104 after the initial installation/programming is fine - however, if you have some extensions set for Delayed Ring or No Ring, you'd be better off using #391-XX-06-1, then changing the ringing settings as needed.

Don't forget to add it to the V.M. dist. group if necessary.

 

[brianb1998]

OK THANKS TOMMY