mmarker2001
Programmer
This is a new client for me. The system is an old ACS V4 with two 206 cards and a Voicemail. It's been up and running for years.
Client called - system had one red light on processor and no lights on other cards. I had her replace the batteries and do a power cycle.
This cleared the error and the system came back up, but after some testing, the programming proved to be corrupted. (phones ringing in all rooms, etc.)
Next day, I went on-site and restored the backup (from 2009) and the system was "back to normal".
4 hours later, they called with the system back to one red light on the processor, I had her do a power cycle and the system came back up good, but I'm concerned that the system is going bad?![[thumbsdown] [thumbsdown] [thumbsdown]](/data/assets/smilies/thumbsdown.gif)
Any comments or suggestions?![[bigears] [bigears] [bigears]](/data/assets/smilies/bigears.gif)
TIA!
Client called - system had one red light on processor and no lights on other cards. I had her replace the batteries and do a power cycle.
This cleared the error and the system came back up, but after some testing, the programming proved to be corrupted. (phones ringing in all rooms, etc.)
Next day, I went on-site and restored the backup (from 2009) and the system was "back to normal".
4 hours later, they called with the system back to one red light on the processor, I had her do a power cycle and the system came back up good, but I'm concerned that the system is going bad?
![[thumbsdown] [thumbsdown] [thumbsdown]](/data/assets/smilies/thumbsdown.gif)
Any comments or suggestions?
![[bigears] [bigears] [bigears]](/data/assets/smilies/bigears.gif)
TIA!