Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
acs 308
- Thread starter hankg
- Start date
TouchToneTommy
Vendor
R3 or higher, with a Remote Access Backup and Restore Card installed
- Thread starter
- #3
What confuses me is that it does not have a admin port so what port do I use to interface the system? I tried the SMDR port but could not connect. I have the program loaded and using the AT&T 355f adapter (Db 25- RJ45)I connected to the parallel port of my computer but still can not access the system. What am I doing wrong? Help!Help! this system needs to up by AM.
Hankg
Hankg
TouchToneTommy
Vendor
The RAC card referenced above provides a MODEM on Ext. 76. You launch the software, dial into your system (several options - out on a line and back in through a live call, auto attendant, or from a station port programmed to grab intercom first), then transfer to Ext. 76. Once you connect, you will get the password prompt, then you can download the translations, modify them, upload the result, and restart the phone system with the new translations.
At least, that's how it's supposed to work - search this forum for many woes connecting
At least, that's how it's supposed to work - search this forum for many woes connecting
- Status
Similar threads
- Question
- Locked
- Question
- Locked
- Question
- Locked
- Question