Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ACL TELENT

Status
Not open for further replies.

dhibsystel

Technical User
Jan 30, 2007
254
TN
I want to block telnet to switch 172.16.10.1 from host 192.168.11.1.

What is the Acces list to implement
 
The command is:
create access-list denytelnet tcp dest 172.16.10.1 ip-port 23 source 192.167.11.1 ip-port any deny ports any

MCSE CCNA CCDA
 
the command don't accepted by the swicth.
may be there are ; " to put in the command.

I use XOS
many thanks

 
There are slight variations dempnding on whether it is an "i" or "e" type of switch.
What model of swotch are you using.

MCSE CCNA CCDA
 
entry block_TELNET {
if {
protocol 6;
source-address 192.168.11.10/32;
destination-port 23;
} then {
deny;
}
}

save this to a .pol file and add the .pol file to the vlan
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top