Hi, I am trying to restrict telnet access to one of our host.
Here's the scenario;
-The router is connected via Serial0/0 to our ISP
-host 192.168.0.1 should be allowed to telnet into 10.10.10.2
-host 10.10.10.2 is connected directly to a switch together w/ the router
-I will be using dummy IPs on the router config below
!
interface Ethernet0/0
ip address 10.10.10.1 255.255.255.0
!
interface Serial0/0
ip address 10.0.1.2 255.255.255.252
ip access-group 101 in
!
access-list 101 deny tcp any host 10.10.10.2 eq telnet
access-list 101 permit tcp host 192.168.0.1 host 10.10.10.2 eq telnet
Is this correct? Please help, any advice would be appreciated.
Here's the scenario;
-The router is connected via Serial0/0 to our ISP
-host 192.168.0.1 should be allowed to telnet into 10.10.10.2
-host 10.10.10.2 is connected directly to a switch together w/ the router
-I will be using dummy IPs on the router config below
!
interface Ethernet0/0
ip address 10.10.10.1 255.255.255.0
!
interface Serial0/0
ip address 10.0.1.2 255.255.255.252
ip access-group 101 in
!
access-list 101 deny tcp any host 10.10.10.2 eq telnet
access-list 101 permit tcp host 192.168.0.1 host 10.10.10.2 eq telnet
Is this correct? Please help, any advice would be appreciated.