Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ACD Q NCF to a PSTN number get fast busy

Status
Not open for further replies.

MCSUSER

Technical User
Apr 2, 2009
31
CA
I would really appreciate if someone can help me in this.
I have a ACD Q 1084999 for a security key, so when users press the key it dials out to a security desk out side of CS1K. However I get fast busy when the key is presses. However, I can manually CF to the same PSTN number. I have attached the ACD Q for your review. If more information needed I can provde. Thanks in advance.
LD 23
10899*
ACDN 1084999


TYPE ACD
CUST 0
ACDN 1084999
MWC NO
DSAC NO
MAXP 1
SDNB NO
BSCW NO
ISAP NO
AACQ NO
RGAI NO
ACAA NO
FRRT
SRRT
NRRT
FROA NO
CALP POS
ICDD NO
NCFW 94165274871
FNCF NO
FORC NO
RTQT 0
SPCP NO
OBTN NO
RAO NO
CWTH 1
NCWL NO
BYTH 0
OVTH 2047
TOFT NONE
HPQ NO
OCN NO
OVDN
IFDN
OVBU LNK LNK LNK LNK
EMRT
MURT
RTPC NO
HOML YES
RDNA NO
LABEL_KEY0 NO
ACNT
NRAC NO
DAL NO
RPRT NO
RAGT 4
DURT 30
RSND 4
FCTH 20
CRQS 100
IVR NO
OBSC NO
OBPT 5
CWNT NONE
 
I would have expected the NCFW to be:

NCFW 9[red]1[/red]4165274871 (9+1+NPA+7 digits)

and not

NCFW 94165274871 (Missing the "1")



[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators
 
Thanks GRTROUT. Do we need "1" even if this is a local number?.
 
Not sure. The test would be if you can dial 94165274871

If you can, then you should be able to NCFW to it.

The other question is "how is this programmed on the phone" (the security key)

And why not just have the security key be a HOT D right to the full number. I can't see any reason for the ACD Queue.


[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators
 
Management doesnt want the key to be tampered with by the users hence the ACD Queue. I will check the phone programming for the security key. tx GRTrout.
 
Users cannot change a HOT key. There is another key choice too: CH D

With CH D you don't have to access dial tone (press the line key) before pressing the security key.

It would be entered like this (using KEY 4 as the example key)

KEY 4 CH D 11 94165274871

You walk up to the phone, press that key, and it rings the number. No need to press anything beforehand.

So far, there is no reason for the ACD queue.

[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators
 
Thanks for the URL...and suggestions. I think they should be Ok with a Hot Key...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top