Hey all I am moving like 10 people from one side of the floor to another. I was thinking of doing this in software however they are ACD phones. I know i would have to de and re aqruire there exsisting tn and add the new. However would it be suggest to move the cross connect. I trying to save time however not sure what is the best and easiest way. Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
ACD Phones to be Moved
- Thread starter BK5426
- Start date
Splic3d
Vendor
- Dec 28, 2012
- 499
DO Not USE THE MOVE COMMAND for ACD SETS. If you use software, out then rebuild. The move command can cause corruption with ACD sets. For me it would be best to move the cross connect.
If its not working, get a bigger hammer!
Avaya/Nortel/NEC/Asterisk/Access Control/CCTV/DSX/Acti/UCx
If its not working, get a bigger hammer!
Avaya/Nortel/NEC/Asterisk/Access Control/CCTV/DSX/Acti/UCx
SSJVirus007
Technical User
Seem like you're using Contact Center, cross-connect is the best route.
- Thread starter
- #4
- Status
Similar threads
- Locked
- Question