Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

ACD Phones to be Moved

Status
Not open for further replies.

BK5426

Technical User
Jun 19, 2013
35
US
Hey all I am moving like 10 people from one side of the floor to another. I was thinking of doing this in software however they are ACD phones. I know i would have to de and re aqruire there exsisting tn and add the new. However would it be suggest to move the cross connect. I trying to save time however not sure what is the best and easiest way. Thanks
 
DO Not USE THE MOVE COMMAND for ACD SETS. If you use software, out then rebuild. The move command can cause corruption with ACD sets. For me it would be best to move the cross connect.





If its not working, get a bigger hammer!

Avaya/Nortel/NEC/Asterisk/Access Control/CCTV/DSX/Acti/UCx
 
Seem like you're using Contact Center, cross-connect is the best route.
 
Thanks all i will be moving the cross connects. Thanks
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top