accessing sys speed from an analog phone

[RookieHHS]

Can anyone tell me how to access sys speed from an analog phone? I have FTR SSU 0000 setup on the phone but I cannot figure out out to make a call using a number in the speed call list. FYI... I am trying to do this on an M8001 phone.

 

[NTOldTimer]

To make a System Speed Call from an analog (500/2500 type) telephone
(User):
1 Lift the handset and dial SPRE 73.
2 Dial the Speed Call code (0-999). The telephone number represented by
the Speed Call code is dialed automatically.
Note: In addition to SPRE codes your system can be equipped with Flexible Feature Codes.

>ld 57
REQ prt
TYPE ffc
CUST 0
CODE sspu

CUST 00
FFCT YES
SCH8896
CODE
!
>err sch8896
>

SCH8896
FFC data does not exist.

 

[RookieHHS]

How would I find out what my SPRE code is? Does it have to be activated for each phone that it is going to be used on? I read that the default SPRE code for an option 11 is 12 in another thread but I get a busy signal when I try to dial it.

 

[RookieHHS]

I figured it out. LD 21 tells you what the SPRE is currently set at. LD 15 allows you to change it. Problem solved.

Thank you NTOldTimer.