Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Access to programme DBC 425 IP phones

Status
Not open for further replies.

downloader101

Technical User
Jan 3, 2009
7
DK
Hi Everyone.
Is there somebody that can tell me how to access programming mode on the DBC 425 IP Phone, so that i can change the setup in eg. the network settings?
I know that if you want to reboot you press "C+mute+#"

Thanks in advance
 
you can always browse to the telephony, login with "Ericsson".

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!
 
I have tried to access via the web page, but the changes that i make there, wont show in the display.
I'm trying to make the phone work as my home phone on the Sip protocol.
 
how upgrade the firmware for iplu card in tsw sp4
 
The case is that the company i worked for, dumped their MX one and instead went out and bought a Siemens HiPath 4000.
When i discovered what kind of crap the HiPath was, i decided that i did not wont to work there anymore, but i managed to nick one of the phones for my personal use. So i'm trying to use the phone as my "home" IP phone.
I have been sucessfull in changing the software on a DRG22 to SIP and it's now in use here.
 
Hi again.
I was not as simple as i thought.
I can see in the configuraion file on the phone, that it still points to the old sws server.
To get this phone up and running as SIP, i need to change in that file, but i think it's a bit difficult to make my own sws server, or dos any of you guys have any ideas?
 
The change of protocl can be done from the Network menu in the phone (in Admin mode).
 
Hi,

can you help me to access DBC 422 through telnet session?got any default password for VxWorks Login?I got the login name but the password that I am getting bit hard.


Tnx

mheroy
 
Hi mheroy

I have never used telnet for accessing the DBC phones. Normally i connect the phone, discover the ip adress and then use a browser. The only password you need is "Ericsson" or "Telephone"
Sorry but that all i know about the Ericsson DBC IP phones.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top