ACCESS TO OVERHEAD PAGING

[TDOG257]

How would you program a ADL to overhead page at another campus. I know the 2 digit access code, but how would you pull it from the other pbx you are trying to page to. Thanks Tdog

 

[johnpoole]

do you have tie lines ? do you have access to the screen on the remote switch?.. at least one of those needs to be yes, if so let me know whicj and i'll help you with a dsc

john poole
bellsouth business
columbia,sc

 

[TDOG257]

YES TIE LINES

 

[TDOG257]

HOW ABOUT IF WE WANT TO DIAL FROM THE OUTSIDE TO REACH THE PBX TO PAGE OR HAVE BOTH WE CAN USE FOR BACK UP.

 

[johnpoole]

easy way: pick a vacant number in the remote switch that is routed across the tie and vacant in the central switch. EXAMPLE: i am sending all 3000 numbers to the main switch, 3339 is not in use in the main switch.. in the main switch, ld 23 new acd acdn 3339 cust 0 maxp 1 ncfw xxxx with x=to the in use paging access.. surprise, the same thing works from outside if you make the new acd a did number.. remember the normal trunk the trunk blocking may need to be modified.. since your (hopefully) using the acod of the page route as an access code, nocs/frl will not be in the way, just make sure none of the routes have the same targ.. only a match blocks.. sorry for the delay but the post was on page 2, next time bump the post back up with any reply


john poole
bellsouth business
columbia,sc