Access to Meridian Mail 1

[cinanza]

Hi all I'm a newbie on Meridian,
I have a problem with Merdian mail on an option 11.
After last logoff from Mail with CTRL + ], when I type ax 8,
the system doesn't load the Meridian Mail screen logon.
I have:

>ax 8
TTY 01 SCH MTC BUG CTY 12:40
OVL111 IDLE 0

For what reason ?
How can I access the Mail ?

Thanks in advance.

Cinanza

 

[GHTROUT]

Try "ax" without the 8

Also, try

>LD 48

.stat aml

I think that might reveal something

[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators

 

[StanleySteamer]

cinanza
Looks like you are not logged into the Option 11.
You will need to log into the Option 11 before you can enter ax.

 

[cinanza]

This is the response of AML.

AML: 07 ESDI: 07 DES: Mail
LYR2: CONNECTED LYR7: ACTIVE EMPTY

 

[GHTROUT]

Well, I think Stanley had the answer

[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators

 

[cinanza]

I'm not logged in.

 

[GHTROUT]

Good observation? Log in to the PBX first, then do AX

[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators

 

[cinanza]

Doesn't function however. Is it possible that is there
a pending session ?

 

[telebub]

If you're logged into the PBX and type "ax" and get an OVL error, then yes it is probably already established on another TTY port.

War Eagle!
Lions Baseball '09!

 

[cinanza]

Is it possible to force logoff ?

 

[GHTROUT]

Your first post - you were not logged into the PBX.

Now that you are logged into the PBX, try the "Ctrl-R" key combo after you AX in.

[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators

 

[telebub]

And if that doesn't work, post the error you get when entering AX after getting logged into the PBX.

War Eagle!
Lions Baseball '09!

 

[DFKSydney]

IF you can log into the PABX, go to LD 37

here do a STAT TTY

If tty 8 is enabled, it means that there ia "another tty" that is accessing mail. The common one here is when a customer has OTM / MAT and do not log off correctly.

Given that you are using TTY 0 (the maintenance port) disable / re-enable the other ttys (1, 2 etc), and eventually the mail tty (8) will go back to its normal disabled state. At that point you can AX into it.

 

[cinanza]

Thank you all, teks-tips is useful than Nortel site.

Cinanza