Access Runtime 2000 and Citrix MF XPa FR2 1

[okm]

Hi,

I'm trying to install art2000 on a terminalserver(win2000 sp3/Citrix MF XPa FR2) with the mst-file(Termsrvr_ART.mst) provided on the microsoft homepage. In the the installation logfile I get the following error(german installation):


Aktion 10:45:42: InstallingShortARM. Dialog created
DEBUG: Error 2726: Action not found: ReadyToInstallARM
Interner Fehler 2726: Bitte kontaktieren Sie Ihren Produktsupport für Unterstützung.
Aktion beendet um 10:45:42: ReadyToInstallARM. Rückgabewert 0.
Aktion gestartet um 10:45:42: SetNOUSERNAME.
Aktion beendet um 10:45:42: SetNOUSERNAME. Rückgabewert 1.
Aktion gestartet um 10:45:42: SetUserNameARM.
Aktion beendet um 10:45:42: SetUserNameARM. Rückgabewert 1.
Aktion gestartet um 10:45:42: SetUserIntialsARM.
DEBUG: Error 2726: Action not found: SetUserIntialsARM
Interner Fehler 2726: Bitte kontaktieren Sie Ihren Produktsupport für Unterstützung.
Aktion beendet um 10:45:42: SetUserIntialsARM. Rückgabewert 0.
Aktion gestartet um 10:45:42: ExecuteAction.
DEBUG: Error 2755: Server returned unexpected error 3 attempting to install package D:\accessrt\min\data1.msi.
Interner Fehler 2755: Bitte kontaktieren Sie Ihren Produktsupport für Unterstützung.
MSI (c) (58:7C): Produkt: Microsoft Access 2000 SR-1 Runtime -- Interner Fehler 2755: Bitte kontaktieren Sie Ihren Produktsupport für Unterstützung.

Aktion beendet um 10:45:47: ExecuteAction. Rückgabewert 3.
Aktion gestartet um 10:45:47: FatalError.
DEBUG: Error 2836: The control Restore on the dialog FatalError can not take focus
Interner Fehler 2836: Bitte kontaktieren Sie Ihren Produktsupport für Unterstützung.
Aktion 10:45:47: FatalError. Dialog created
Aktion beendet um 10:45:49: FatalError. Rückgabewert 2.
Aktion beendet um 10:45:49: INSTALL. Rückgabewert 3.

When I'm trying to open the mst-file with the custom-installation-wizard and my accessruntime data1.msi i'm getting the error: "the mst-file does not correspond to the
MSI file"

Whem I'm trying to create my own mst-file it's not regicognized as a terminal-server transform !


Thanks for yours help!

 

[BeerGood]

It could be the German language thing (ah well), but what command are you using to run the install? It should be something along the lines of:
"\accessRT\full\setup.exe" TRANSFORMS=
"c:\program files\orktools\toolbox\tools\terminal server tools
\termsrvr_art.mst""

Where setup.exe is from the developer toolkit....

Cheers

 

[okm]

hopefully it isn't the german thing ! in fact, on an other server it worked fine (same server, software and update-levels) !

i'm using the command you described above !

strange thing !

 

[BeerGood]

Are you running the install from the terminal server console itself, or remotely? If remotely, try running it from the actual console. I know in theory it shouldn't matter, but in practise I've found it sometimes does. Also, make sure all the files are local - otherwise use the full unc rather than a mapped drive. In fact:

http://support.microsoft.com/default.aspx?scid=kb;EN-US;Q255582

;-)

Cheers
P.S. kbalertz is a useful site - eg

http://www.kbalertz.com/sresults.aspx?sw=2755

 

[okm]

that was the problem, I stored the files on my lokal pc, not on the server and run the setup from a citrix session !
now i did everything from the console and it worked fine !

thanks so much !