When dialing an international conference line through an Ericsson MD110 (version BC8), the call routes through a Nortel Gateway. Once the call connects to the international conference line, it prompts for the access code. The access code keeps getting rejected as not being recognized. We rerouted the numbers to go over the PSTN and there are no issues. Are there any known issues between the Ericsson MD110 and Nortel Gateways? The Ericsson version BC8 is very old as well - not sure if that would be the problem.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Access codes not being recognized for Meet Me Lines
- Thread starter Kinger98
- Start date
securipdect
Technical User
check RODAI and ROCAI D3 SERV and RODDI to Nortel.
can you print?
rocap
rodap
roddp
aspap 56
can you print?
rocap
rodap
roddp
aspap 56
- Status
Similar threads
