In a network of say 2 BCM50's connected by H323 if the private DN length is 4 digits this works fine for set to set dialling between the systems. However if BCM B has no PSTN trunks and I want it to have access to the trunks on BCM A. I can setup a remote package etc.
However how to I allow BCM B to dial more then 4 digits across the network calls for those calls that are destined for the PSTN via BCM A?
However how to I allow BCM B to dial more then 4 digits across the network calls for those calls that are destined for the PSTN via BCM A?