About dhcp II, the return of the error

[fffrrr]

Sorry if I'm being persistent, but I dont find the solution with this particular problem. I have read about it, I have followed the recommended practices but I still havent got results.

This is the link of the problem.

http://www.tek-tips.com/viewthread.cfm?qid=1577735

 

[fffrrr]

OBTAINED SOLUTION:

#### ENABLING THE OPTIONS ON THE DESKTOP SCOPE FOR IP PHONES IGNORE THIS POOL

G450-001(super-DHCP 10/option 172)# value ascii "L2Q=1,L2QVLAN=200"
G450-001(super-DHCP 10/option 172)# exit
G450-001(super-DHCP 10)# option 242
G450-001(super-DHCP 10/option 242)# value ascii "L2Q=1,L2QVLAN=200"
G450-001(super-DHCP 10/option 242)# exit



#### DHCP CONFIGURATION FOR 46xx & 96xx IP PHONE MODELS

G450-001(super-DHCP 20)# option 172
G450-001(super-DHCP 20/option 172)# name "46xx Series IP phones"

#### THIS PARAMETER "TFTPSRVR=0.0.0.0" ALLOWS A QUICK BOOT UP, IF THIS PARAMETER MISSING MAYBE YOU EXPERIENCE PROBLEMS

G450-001(super-DHCP 20/option 172)# value ascii "MCIPADD=10.200.1.129, MCPORT=1719, TFTPSRVR=0.0.0.0, L2Q=1, L2VLAN=200"
G450-001(super-DHCP 20/option 172)# exit
G450-001(super-DHCP 20)# option 242
G450-001(super-DHCP 20/option 242)# name "96xx Series IP phones"
G450-001(super-DHCP 20/option 242)# value ascii "MCIPADD=10.200.1.129, MCPORT=1719, TFTPSRVR=0.0.0.0, L2Q=1, L2VLAN=200"
G450-001(super-DHCP 20/option 242)# exit
G450-001(super-DHCP 20)# exit

 

[billybobdan]

MMm I notice you are using SSON 172 unless you have manually changed every phone to use 172 then maybe it should be 176 not i72..

Cia

 

[Tolson]

Don't forget the 96xx series of phones need to get their updates from an HTTP server, either open or secure, so for the 242 setting you should be using either HTTPSRVR=x.x.x.x or for the secure ports use TLSSRVR=x.x.x.x.