Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

About dhcp II, the return of the error

Status
Not open for further replies.

fffrrr

Technical User
Feb 18, 2009
24
MX
Sorry if I'm being persistent, but I dont find the solution with this particular problem. I have read about it, I have followed the recommended practices but I still havent got results.

This is the link of the problem.
 


OBTAINED SOLUTION:

#### ENABLING THE OPTIONS ON THE DESKTOP SCOPE FOR IP PHONES IGNORE THIS POOL

G450-001(super-DHCP 10/option 172)# value ascii "L2Q=1,L2QVLAN=200"
G450-001(super-DHCP 10/option 172)# exit
G450-001(super-DHCP 10)# option 242
G450-001(super-DHCP 10/option 242)# value ascii "L2Q=1,L2QVLAN=200"
G450-001(super-DHCP 10/option 242)# exit



#### DHCP CONFIGURATION FOR 46xx & 96xx IP PHONE MODELS

G450-001(super-DHCP 20)# option 172
G450-001(super-DHCP 20/option 172)# name "46xx Series IP phones"

#### THIS PARAMETER "TFTPSRVR=0.0.0.0" ALLOWS A QUICK BOOT UP, IF THIS PARAMETER MISSING MAYBE YOU EXPERIENCE PROBLEMS

G450-001(super-DHCP 20/option 172)# value ascii "MCIPADD=10.200.1.129, MCPORT=1719, TFTPSRVR=0.0.0.0, L2Q=1, L2VLAN=200"
G450-001(super-DHCP 20/option 172)# exit
G450-001(super-DHCP 20)# option 242
G450-001(super-DHCP 20/option 242)# name "96xx Series IP phones"
G450-001(super-DHCP 20/option 242)# value ascii "MCIPADD=10.200.1.129, MCPORT=1719, TFTPSRVR=0.0.0.0, L2Q=1, L2VLAN=200"
G450-001(super-DHCP 20/option 242)# exit
G450-001(super-DHCP 20)# exit
 
MMm I notice you are using SSON 172 unless you have manually changed every phone to use 172 then maybe it should be 176 not i72..

Cia
 
Don't forget the 96xx series of phones need to get their updates from an HTTP server, either open or secure, so for the 242 setting you should be using either HTTPSRVR=x.x.x.x or for the secure ports use TLSSRVR=x.x.x.x.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top