Abbreviated Dialing on Attendant Console 1

[glenng3]

Hey, it's me again. We have an attendant console that has some buttons programmed with abbreviated dialing lists, and I can't figure out how to display or change the lists. I'm pasting below the relevant page from "disp att 1". What's the command to display dialing list 3? Our switch is a Definity G3 (R013x.01.5.642.3). Thanks. -G.

display attendant 1 Page 3 of 4
ATTENDANT CONSOLE

FEATURE BUTTON ASSIGNMENTS

1: split 13: busy-ind TAC/Ext: 3096
2: abrv-dial List: 3 DC: 97 14: busy-ind TAC/Ext: 3097
3: abrv-dial List: 3 DC: 98 15: busy-ind TAC/Ext: 3098
4: abrv-dial List: 3 DC: 99 16: busy-ind TAC/Ext: 820
5: 17:
6: hold 18: abrv-dial List: 3 DC: 11
7: busy-ind TAC/Ext: 3090 19: forced-rel
8: busy-ind TAC/Ext: 3091 20:
9: busy-ind TAC/Ext: 3092 21:
10: busy-ind TAC/Ext: 3093 22: aut-msg-wt Ext: 3000
11: busy-ind TAC/Ext: 3094 23: night-serv
12: busy-ind TAC/Ext: 3095 24: pos-busy

 

[AvayaTier3]

enhanced 1 or 2
system
group 1 to 1000

display console-parameters                                      Page   2 of   4
                              CONSOLE PARAMETERS

TIMING
  Time Reminder on Hold (sec): 30           Return Call Timeout (sec): 30
  Time in Queue Warning (sec):

  INCOMING CALL REMINDERS
      No Answer Timeout (sec):                         Alerting (sec):
                               Secondary Alert on Held Reminder Calls? y

ABBREVIATED DIALING
     List1: enhanced 1        List2: system             List3: group    1
             SAC Notification? n

                           COMMON SHARED EXTENSIONS
            Starting Extension:                  Count:

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

39 years Bell, AT&T, Lucent, Avaya
Tier 3 for 29 years and counting
[URL unfurl="true"]http://bshtele.com[/url]

 

[glenng3]

Yes, display console-parameters tells me it's a system list. Thanks. -G.

 

[vstarrosie]

if your Console Parameters pages shows System as your List three, then enter the command; Change Abbreviated-Dial System. the DC is the Dial Code within the System list. so if it's DC 97 go find number 97 within the System list and change what's there.
but be forewarned that what ever you change for the Attd Console, you will be changing for everyone else who uses that entry also.