Aavya 302 Console

[dazling]

Hi All
I have just had to install an Avaya 302 console and the client is asking. If they have a incoming external call on line a and a incoming internal call on line b. Can they bridge both calls together on the the console and if so how.

Many Thanks

Daryl

 

[Toni269]

Manual:

https://downloads.avaya.com/elmodocs2/definity/ds9_ip600/233416_1/230890_3/230890_3.pdf

The Conference feature allows you to set up a conference call for up to 6 parties.
To use the Attendant Conference feature, perform the following:

1. While on an active call, press the START button.
n You hear a dial tone.
n The Split lamp goes on.
2. Call the person you want to add to the conference.
n You hear a ringback tone.
3. After contacting the new person, press the SPLIT button.
n All parties, including the console, are connected together.
n The Split lamp goes off.
4. To add more parties to the conference, repeat Steps 1, 2, and 3.

NOTE:
If you cannot reach one of the called parties, press the CANCEL button
to end the attempt and rejoin the existing conference.
You can remain on the conference call, press the HOLD button to place the call on
hold, or press the RELEASE button to drop off the call.