AAR

[tgray1]

I have created a new trunk group for which I only want certain calls go go out. How can I marry this trunk group to my AAR dial access code?
I do not/cannot use a TAC.

Thanks

 

[mojoputter]

I believe you want to use ARS not AAR. In the example below if the user dials a number starting with 612 it goes out route pattern 2, but if they dial 6123632626 they go out route pattern 3. Is this what your looking to do..?


change ars analysis 612 Page 1 of 2
ARS DIGIT ANALYSIS TABLE
Location: all Percent Full: 3

Dialed Total Route Call Node ANI
String Min Max Pattern Type Num Reqd
612 10 10 2 hnpa n
6123632626 10 10 3 hnpa n

 

[tgray1]

I did not want to use the ARS to do this. I am just trying to figure out how to create a AAR access code and that will only utilize trunk group 5 when that code is entered before the 1-512-xxx-xxxx is dialed.

Thanks

 

[AvayaTier3]

change aar analysis 1512

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

35 years Bell, AT&T, Lucent, Avaya
Tier 3 for 25 years and counting

http://bshtele.com

 

[4merAvaya]

First, define the AAR access code in System Features. Second, populate the AAR Analysis table (change aar analysis). Third, create your Route Pattern.

Kevin