JoseAntonio_2001
Programmer
hello,
I am implementing an AAMS platform, in a network where I have
CM_Duplex/SM/SMGR/ASBCE, on VMWARE, version 8.1.x
As Mediagateway we have a G650, with two cabinets.
With the following Control interfaces
01A01 IP SERVER INTFC TN2312BP HW36 FW058
01A03 CONTROL-LAN TN799DP HW01 FW045
01A04 VAL-ANNOUNCEMENT TN2501AP HW16 FW024
01A14 IP MEDIA PROCESSOR TN2302AP HW20 FW122
Currently there are still many analog telephones and as trunking they operate with Tres E1 R2.
Ip telephones there are around two hundred and fifty
You want to gradually migrate the solution to having only IP and change the Mediagateway G650 for G450
At the moment, I carried out the deploy and configuration of the AAMS, in all its recommended configurations against the CM and SMGR.
I have isolated the AAMS to a special IP-network-region, which I share with a phone for testing.
When carrying out a Laboratory scenario, I observe that at the internal calls level, the extensions access the AAMS,
Giving the initial voice resources, I find it works.
When wanting to access a service that involves trunking, in this case the E1 R2, the system always gives me the MEDPRO resources.
As a test, place the MEDPRO Busy. I did the same laboratory, but the system tells me that there are no resources available.
I have looked for information that guides me to know where the problem is, but I have not found it yet.
With your experiences, has this happened to you???
I appreciate your comments
I am implementing an AAMS platform, in a network where I have
CM_Duplex/SM/SMGR/ASBCE, on VMWARE, version 8.1.x
As Mediagateway we have a G650, with two cabinets.
With the following Control interfaces
01A01 IP SERVER INTFC TN2312BP HW36 FW058
01A03 CONTROL-LAN TN799DP HW01 FW045
01A04 VAL-ANNOUNCEMENT TN2501AP HW16 FW024
01A14 IP MEDIA PROCESSOR TN2302AP HW20 FW122
Currently there are still many analog telephones and as trunking they operate with Tres E1 R2.
Ip telephones there are around two hundred and fifty
You want to gradually migrate the solution to having only IP and change the Mediagateway G650 for G450
At the moment, I carried out the deploy and configuration of the AAMS, in all its recommended configurations against the CM and SMGR.
I have isolated the AAMS to a special IP-network-region, which I share with a phone for testing.
When carrying out a Laboratory scenario, I observe that at the internal calls level, the extensions access the AAMS,
Giving the initial voice resources, I find it works.
When wanting to access a service that involves trunking, in this case the E1 R2, the system always gives me the MEDPRO resources.
As a test, place the MEDPRO Busy. I did the same laboratory, but the system tells me that there are no resources available.
I have looked for information that guides me to know where the problem is, but I have not found it yet.
With your experiences, has this happened to you???
I appreciate your comments